T60 Ambulatory Syringe Pump with Motor Driven Linear Actuator

CME Medical T60 Ambulatory Syringe Pump
Request a Quote


Syringe Pump with motor driven linear actuator, pulsed motion (60 pulses per mm)

The system may not meet all performance specifications if operated outside of the following conditions:

  • Temperature: +15°C to +45°C (+59°F to + 113°F)
  • Humidity: 20% to 85% R.H. at +40°C, non-condensing
  • Air Pressure: 70kPa to 110kPa


Device type Syringe Pump with motor driven linear actuator, pulsed motion (60 pulses per mm)
Flow rate 0.1 to 100ml/h in 0.1ml increments, 100 to 650ml/h in 1 ml increments
Actuator stoke c.106 mm available
Syringe sizes 2 ml to 60 ml (Pump configured to most commonly used syringes including BD Plastipak, Monoject, Braun, Terumo and Codan syringes but can also be programmed to other brands)
Pump accuracy ± 2 %
Occlusion pressure 100 to 1500mmHg configurable (10mmHG increments). Max. actuator force 50N (5 Kgf)
Battery Integral rechargeable li-polymer 1800 mAh
Battery operation c.100 full deliveries depending on infusion & set up parameters
Indicators Display 128 x 64 pixels with back light (8 keys) & dual color operation LED
Alarms and Alerts When a problem is detected, the T60 displays the following alarms: Pump Unattended/pump paused to long – Occlusion/Empty Syringe – Program nearly completed (alert) – End of Infusion – Low Battery (alert)- End Battery – System Error – Syringe Displaced
Dimensions 38 x 55 x 190mm
Classification Class II Type CF equipment
Housing ABS (fire retardant)
Weight 400g with battery
Electrical safety Complies with: EN 60601-1 (medical electrical Equipment Safety), IEC 60601-2-24 (infusion pumps and controllers), IEC 60601-1-4 (programmable electrical medical system), UL 60601- 1 and CAN/CSA C22.2 No 601.1.
Standards Manufactured in accordance to ISO 9001:2000 and ISO 13485:2003. CE marked (in accordance with the Medical Devices Directive 93/42/EEC)
EMC IEC 60601-1-2 (EMC)
Environmental specifications Non operating conditions (transportation and storage)
Temperature -25°C to 50°C (-13 °F to + 122°F)
Humidity 5 % to 100% R.H., non-condensing
Air Pressure 48kPa to 110kPa